Automated design systems as one of the innovative directions in the creation of electronic equipment.
Keywords:
electronic equipment, computer-aided design systems, trends, ways and prospects of development, IT technologies, innovations.
Abstract
The article considers the current state, presents the main types and identifies trends in the development of computer-aided design of electronic equipment in leading countries. It is established that the use of modern computer-aided design systems allows to combine design and production into one process and reduce the time and cost of creating electronic equipment. The current state of development, use and prospects of development of computer-aided design systems for electronic equipment in Ukraine are also analyzed.
References
Ponomarev Yu. V., Dyachuk O. Yu., Grabar IG (2013). Methods of designing electronic devices by various computer-aided design systems. Collection of scientific works of ZhVI NAU, 7, 88–100.
Alekseev O. V., Golovkov, A. A. (2000). Automation of designing radio-electronic means: textbook. manual. for universities. Moscow: Higher. shk., 479 p.
Kolodnitsky, M. M. (1999). Elements of the theory of CAD of folding systems: navch. posib. Zhitomir: ZhITI, 512 p.
Ponomarov, Yu. V. (2006). Basics of automation of radioelectronic equipment design. System of circuitry model Electronics Workbench. Zhitomir: ZhVIRE, 196 p.
Review of software products of electronic CAD. (2020). URL: http://pspicelib.narod.ru/01_modelirovanie/obzor_sapr.htm (Last accessed: 03/17/2020).
Herniter Mark, E. (2006). Multisim: Modern system of computer modeling and analysis of circuits of electronic devices / per. from English A.I. Osipov. Moscow: Publishing house. house DMK-pres ,. 488 s.
Razevig, V.D. (2001). Design of printed circuit boards in P-CAD 2001. Moscow: Solon-R, 560 p.
Zaelenchets, A. S., Butova, A. L. (2016). Analysis and prospects for the development of computer-aided design systems in construction. Young Scientist, 63 (110.3), 21–23.
Astafieva, V.V. (2016). Computer modeling in Russia. Young Scientist, 21 (125), 747-750.
Soviets, B. Ya., Yakovlev, S. A. (2001). System modeling: a textbook for universities. Moscow: Higher school, 320 p.
Dyatlov M.N., Yudkin I. Yu., Shlyakhovsky A.A. (2015). Development trends of modern integrated design systems. Young Scientist, 2 (82), 148–150.
Dyatlov, M.N., Fedotov, M. Yu., Fedotova, N.V. (2013). Optimization of design time using modern engineering CAD systems. Young Scientist, 10 (1), 138-140.
Stempkovsky, A. L. (2015). Microelectronic CAD: yesterday, today, tomorrow. June 29. URL: http://isicad.ru/ru/articles.php?article_num=17837. (Last accessed: 03/17/2020).
Tosheva M. Kh., Khudoyorova O. M., Azimova D. Yu. (2016). Use of modern information technologies. Young Scientist, 25 (129), 4–5.
Alekseev O. V., Golovkov, A. A. (2000). Automation of designing radio-electronic means: textbook. manual. for universities. Moscow: Higher. shk., 479 p.
Kolodnitsky, M. M. (1999). Elements of the theory of CAD of folding systems: navch. posib. Zhitomir: ZhITI, 512 p.
Ponomarov, Yu. V. (2006). Basics of automation of radioelectronic equipment design. System of circuitry model Electronics Workbench. Zhitomir: ZhVIRE, 196 p.
Review of software products of electronic CAD. (2020). URL: http://pspicelib.narod.ru/01_modelirovanie/obzor_sapr.htm (Last accessed: 03/17/2020).
Herniter Mark, E. (2006). Multisim: Modern system of computer modeling and analysis of circuits of electronic devices / per. from English A.I. Osipov. Moscow: Publishing house. house DMK-pres ,. 488 s.
Razevig, V.D. (2001). Design of printed circuit boards in P-CAD 2001. Moscow: Solon-R, 560 p.
Zaelenchets, A. S., Butova, A. L. (2016). Analysis and prospects for the development of computer-aided design systems in construction. Young Scientist, 63 (110.3), 21–23.
Astafieva, V.V. (2016). Computer modeling in Russia. Young Scientist, 21 (125), 747-750.
Soviets, B. Ya., Yakovlev, S. A. (2001). System modeling: a textbook for universities. Moscow: Higher school, 320 p.
Dyatlov M.N., Yudkin I. Yu., Shlyakhovsky A.A. (2015). Development trends of modern integrated design systems. Young Scientist, 2 (82), 148–150.
Dyatlov, M.N., Fedotov, M. Yu., Fedotova, N.V. (2013). Optimization of design time using modern engineering CAD systems. Young Scientist, 10 (1), 138-140.
Stempkovsky, A. L. (2015). Microelectronic CAD: yesterday, today, tomorrow. June 29. URL: http://isicad.ru/ru/articles.php?article_num=17837. (Last accessed: 03/17/2020).
Tosheva M. Kh., Khudoyorova O. M., Azimova D. Yu. (2016). Use of modern information technologies. Young Scientist, 25 (129), 4–5.
Abstract views: 0 PDF Downloads: 0
Published
2020-09-18
How to Cite
Hnatchenko, D. (2020). Automated design systems as one of the innovative directions in the creation of electronic equipment . COMPUTER-INTEGRATED TECHNOLOGIES: EDUCATION, SCIENCE, PRODUCTION, (40), 10-15. https://doi.org/10.36910/6775-2524-0560-2020-40-02
Section
Automation and Control